Training on installations of our systems is provided free of charge through our distributors. The SP501 solar collector is the simplest and quickest solar panel to install. It arrives fully assembled and with practice can be installed in 15-20 minutes. As the SP501 solar thermal panel is one of the most powerful solar panels in the world and the lowest cost installation, it gives your customer the best product with significant savings on installation. Below is a picture gallery to show you how quick, simple and easy it is to install an SP501 Solar Thermal Panel.

Click on the pictures to get a large copy.

1. Bracketing included including stainless steel mounting bolts			2. You can install on any roof type			3. Finding the timber beams is all that is required
4. Locate the cross timber and main beam junction			5. Chalk mark the mounting point			6. Translate the chalk onto the tile when repositioned
7. Drill the tile first and the timber pilot hole second			8. Insert the stainless bolt (4 per collector)			9. Screw well into the timber beam
10. Secure the watertight seal against the tile			11. All bolts now in place (4 per collector)			12. Attach the stainless steel collector bracket to the bolt
13. Now all 4 brackets are in place			14. Take the collector out of the box			15. The sliding mounting bolts are already in the collector structure (4)
16. Drop the collector onto the mountings			17. Attach the locking nuts			18. Tighten the collector nuts
19. Installation is simple and fast (15-20 mins)			20. SP501 collectors should have temp control installed due to very high temperatures possible			21. System can outperform all regular collectors up to as much as 4 times
22. Joining collectors together is simple and fittings provided			23. Plumbing parts in the box			24. Special taper fittings are provided to deal with the very high temperatures
25. Just insert and tighten			26. Don't forget to double insulate			27. Smaller powerful collectors don't dominate your roof.